I try to go 9/16"...you will be just great!
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Headstock too thin? http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=4551 |
Page 1 of 1 |
| Author: | Wes McMillian [ Sun Jan 15, 2006 1:48 pm ] |
| Post subject: | |
Quick question. After all is said and done, my headstock come out at 9/16". Is this too thin? Should I plan an overlay on the back? (This could get complicated with my volute. Might have to come off?) I'm using Grover 18:1 Sta-Tites. Thanks! |
|
| Author: | Grant Goltz [ Sun Jan 15, 2006 2:18 pm ] |
| Post subject: | |
You should be fine. Grant Goltz |
|
| Author: | L. Presnall [ Sun Jan 15, 2006 2:29 pm ] |
| Post subject: | |
I try to go 9/16"...you will be just great!
|
|
| Author: | TonyKarol [ Mon Jan 16, 2006 2:49 am ] |
| Post subject: | |
9 16ths is what i use, but on an electric with a rock maple neck, you could go as low as 1/2. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|